Quonset Microwave QM1004-8-12-100, User Manual, Page: 34 / 91

QM1004-8-12-100 Combined RF Upconverter/Downconverter User Manual
1.2 FREQuency Subsystem
Table 4.2: FREQuency Subsystem Commands Summary
Command Page Description
FREQuency:LO1:DIVider 25 Sets or Returns the reference divider of the LO1s for
both channels.
FREQuency:LO1:EXTernal 26 Sets or Returns whether the internal or external sup-
plied LO1 local oscillator is used for both channels.
FREQuency:LO1:LOCK 27 Returns the lock status of the internal LO1s for both
channels.
FREQuency:LO1:PLLMode 28 Sets or Returns the PLL Mode (
Integer
or
Fractional
)
of the internal LO1 for both channels.
FREQuency:LO2:EXTernal 30 Sets or Returns whether the internal or external sup-
plied LO2 local oscillator is used for both channels.
FREQuency:LO2:LOCK 31 Returns the lock status of the internal LO2 for the sys-
tem.
FREQuency:LOCK 32 Returns the lock status of the internal LOs for both
channels.
FREQuency:REFerence:EXTernal 33 Sets or Returns whether the internal or external sup-
plied reference oscillator is used.
FREQuency:REFerence:FREQuency 34 Sets or Returns the reference frequency when using
an externally-supplied reference.
FREQuency:REFerence:LOCK 35 Returns the lock status for the incoming external refer-
ence signal and the outgoing references.
FREQuency:TUNE 36 Sets or Returns the desired tuning frequency in GHz
for both channels.
FREQuency:TUNErACTual 37 Returns the actual tuning frequency in GHz for both
channels.
1.3 POWEr Subsystem
Table 4.3:
POWEr Subsystem Commands Summary
Command Page Description
POWEr:CH1:ATTENuation 38 Sets or Returns the value of RF attenuation for channel
1 (upconverter).
POWEr:CH2:ATTENuation 39 Sets or Returns the value of RF attenuation for channel
2 (downconverter).
POWEr:LNA 40 Turns on or off the upconverter LNA gain stage of the
device.
Quonset Microwave Revision 2.0.0 23