Quonset Microwave QM1004-0.5-18, User Manual, Page: 43 / 105

QM1004-0.5-18 Combined RF Upconverter/Downconverter User Manual
1.3 POWEr Subsystem
Table 4.3: POWEr Subsystem Commands Summary
Command Page Description
POWEr:LNA 47 Sets or Returns the on/off status of both channels’
LNAs.
POWEr:RF 48 Turns on or off the RF output of the device.
POWEr:CH1:AT1 49 Sets or Returns the value of the first upconverter at-
tenuator.
POWEr:CH1:AT2 50 Sets or Returns the value of the second upconverter
attenuator.
POWEr:CH1:LNA 51 Sets or Returns the on/off status of the upconverter’s
LNA.
POWEr:CH2:AT1 52 Sets or Returns the value of downconverter attenua-
tion.
POWEr:CH2:LNA 53 Sets or Returns the on/off status of the downcon-
verter’s LNA.
1.4 STATus Subsystem
Table 4.4: STATus Subsystem Commands Summary
Command Page Description
STATus:OPERation 54 Returns the contents of the status event register.
STATus:OPERation:CONDition 55 Returns the contents of the condition register.
STATus:OPERation:ENABle 56 Sets the enable bit mask for the status event register.
STATus:PRESet 57 Presets the STATus:QUEStionable:ENABle register.
STATus:QUEStionable 58 Returns the contents of the questionable register.
STATus:QUEStionable:CONDition 59 Returns the contents of the questionable condition reg-
ister.
STATus:QUEStionable:ENABle 60 Sets the enable bit mask for the questionable register.
Quonset Microwave Revision 1.2.1 32