12
•
Place generator on a level surface.
•
Remove screws and then remove the outer casing
cover.(You must remove the spark plug cover to push
the side
panel off from the inside)
.
CAUTION!
generator. Always check oil level before each operation.
ASSEMBLY
•
•
Be sure to replace dipstick and securely tighten before attempting to start the engine.
Insert a funnel into the crankcase dipstick hole and carefully add the specified amount of 4-Cycle engine oil (SAE 10W-
30) to empty reservoir until or oil reaches the outer edge of the oil fill hole (crankcase dipstick hole).
•
To check oil, set generator on a level surface, wipe dipstick clean, then reinsert dipstick without re-threading.
•
Remove the crankcase dipstick.
Recommended Oil: SAE 10W-30
Oil Capacity: 0.35L (
11.8oz
)
