ITA-200 Technical Reference Manual Rev 1.0
___________________________________________________________________
_____________________________________________________________________________________
Copyright © 2004-2006 Quintum Technologies, Inc. All Rights Reserved
50 of 58
bckRegPort:
The local port used by ITA-200 to communicate with
the secondary SIP Proxy Server. The default value is
5060.
For configurate the SIP Client Information:
This is where you specify the telephone number for the line 1 to be registered to
the SIP Proxy Server.
enablePhone1:
Enter 1 for enable or 0 for disable.
phoneNumber1:
The telephone numbers of your ITA-200.
displayName1
The Caller ID’s of the telephone numbers.
authenticationID1
The authentication ID used when registering the
telephone numbers to the SIP Registration Server.
enableAuthID1:
Will enable Authentication. Enter 1 for enable or 0 for
disable.
phonePwd1:
The password is for authorization with the SIP proxy
(MD5 SIP authentication)
For change the Server Configurations:
configServer:
The URL string or IP address of the HTTP or TFTP
server used for firmware upgrade and configuration.
Example:
www.company.com/config_file
192.168.10.100
useHttpOrTftp:
select the type of server, (0 for HTTP and 1 for TFTP)
3. Go to start and open a DOS Command Prompt and go to ConfigFile folder type: cd
c:\ConfigFile. (Figure 23)
