ITA-200 Technical Reference Manual Rev 1.0
___________________________________________________________________
_____________________________________________________________________________________
Copyright © 2004-2006 Quintum Technologies, Inc. All Rights Reserved
38 of 58
Chapter 7
Configuration File
There are 3 ways to download the config file on the ITA200:
1. Download configuration file.
2. Auto config Download timer.
3. Download the configuration file through a voice prompt.
1. Download Configuration File:
Before proceeding it is required that you have a HTTP/TFTP server running, and
must have the config file. For details on how to create the config file refer to
Appendix C.
1
Connect the pc to the LAN port of the ITA200, and login to the unit
with all privilege. To login with full access (Refer to page 15).
2
Select Misc.servers tab.
3
On the Firmware/Config Server: add the IP or domain name of the
HTTP/TFTP server and select the type of server. Note: if the
server is HTTP the ITA200 will try to access the subdirectory you
have specified on the Firmware/Config field to look for the
firmware
or
configuration
file.
Example:
www.company.com/config_directory
(Figure 20).
4
Press UPDATE to save the changes.
5
Select Maintenance tab.
6
Select Download Configuration File (Figure 21)
7
Press Submit Request.
Figure 20. Firmware/Config Server
