4.2
Main screen
When working in normal operation the display shows the following image:
• In the upper right area, the current working phase countdown and the measured dew point
are visualized.
When the PDP (pressure dew point) sensor is not enabled, the dew point is not displayed.
When the PDP sensor is enabled but either not connected or defective, no dew point value
is displayed (four dashes substitute the measure).
• In the lower area, the current working phase of each vessel is displayed.
• In the upper left area of the screen, an animated icon is present:
Icon
Description
Rotating arrow
Active when the dryer is in its working phases
Still vertical bars.
Visualized when the dryer is in the FREEZE status.
Still square.
Visualized when the dryer is stopped.
The possible working phases are:
Phase
Text displayed on screen
Translation
Stop
STOPPED
STOPPED
Shifting
SHIFTING
SHIFTING
Adsorbing
ADSORBING
ADSORBING
Pressure relief
DEPRESS
DEPRESS
Regeneration
REGENERAT
REGENERAT
Pressure equalize
EQUALIZE
EQUALIZE
Freeze
FREEZE
FREEZE
Standby
STANDBY
STANDBY
Blowing off
BLOW OFF
BLOW OFF
4.3
Selection Menu
When the ENTER button is pressed in the normal operation main screen (not during alarm!),
following selection menu is shown:
Instruction book
16
2920 7111 40