Solana Virena Mode Installation Instructions for Virena WR11 4G LTE Router
Page
5
of
5
Perform a Test in Virena Mode
1.
Go to Main Menu
New Test.
2.
Select Test, choose tube locations, enter Lot ID and Kit Exp. Date, and then tap Next.
3.
Sample ID and Patient Demographics screen is displayed (Figure 8).
4.
Enter Sample ID, if required. Tap the enter key.
5.
Enter numeric value for “Age” in years. Tap the enter key.
6.
Press the down arrow and select “Patient Status” (tap In
-patient, Out-patient, or Proficiency).
7.
Tap open button under Study Fields, if required. Enter 2 digit Study Field and tap the enter key after each
Study field.
Then tap the green checkmark.
8.
Assign the Sample ID to the appropriate tube as required. Repeat steps 4-8 as necessary for each tube.
Then tap the green checkmark.
9.
Tap the green start button to begin the test.
Note:
Study Code A-D allows for additional demographics data not currently defined in Sofia with a limit of 2
numeric characters.
Note:
For additional information regarding Virena WR11 Router safety, certifications, and product disposal,
refer to: quidel.com/virena.
1332700EN00 (02/17)
Figure 9
