Solana Virena Mode Installation Instructions for Virena WR11 4G LTE Router
Page
2
of
5
3.
Connectivity Verification:
After powering on the Virena WR11 Router, wait 5 minutes before confirming
the following lights are illuminated for connection purposes (Figure 3).
◼
POWER
–
solid green light
◼
SIGNAL
–
solid green light represents
good connection. If amber color light is
shown, consider relocating the router to
a different location.
◼
SERVICE
–
this light should flash in
groups of either 1, 2 or 3 times
Note:
The connection provisioning time may take up to 15 minutes. If there is no Verizon Wireless connection
or if LAN connection is preferred, please contact Quidel Technical Support at 800.874.1517 (in the U.S.),
858.552.1100 (outside the U.S.) or e-mail [email protected].
Solana Installation and Connection
There are five (5) steps to establishing the connection between the Solana and Virena WR11 Router.
1.
Solana and Virena WR11 Router Connection
2.
Set Network Configuration on Solana
3.
Virena Mode Set Up
4.
Virena WR11 Router Connection Verification
5.
How to Perform a Test in Virena Mode
Solana and Virena WR11 Router Connection
1.
Power OFF Solana.
2.
Connect the Ethernet Cable:
Connect one end of the Ethernet cable to the port on the router and the
other end to a LAN port on the back side of Solana (Figure 4).
3.
Power ON Solana.
Figure 4
Figure 3
