QuickWorldWide Super Learner Pro, Instruction Manual

Page: 43 / 85

No. Bag# Description Qty
1 Step 2 Assembly up to Section 2 1
2 3 Landing Gear Strut 2
3 3 Landing Gear Skid 2
4 3 Landing Gear End Cap 4
5 HB M2.5x6 Self Taping Screws 4
6 HB M3x12 Cap Head Bolt 4
7 HB M3 Locknut 4
8***** CA Glue 1
•
Drill 4 holes in the Landing Gear Struts with a 3mm drill bit with a spacing of 71mm
•
Install the Landing Gear Skids into the Struts.
•
Apply CA Glue into the Landing Gear End Cap then insert them into the Skids.
Drill four 2.5mm holes into the little rounds on the ends of the Struts then secure them with the
four M2.5x6 Phillips Screws.
•
Install the Main Frames onto the Landing Gear Assembly and secure them with
four M3x14 Cap Head Bolts.
Note: It is recommended to use “Landing Gear Dampener” to reduce vibration. See
“Other Hardware & Optional Accessories” to make order. Landing Gear Dampener is
installed between the Landing Gear and the Landing Supports.
Page 43 of 85