QuickWorldWide Little Sweetie 10 Pro, Assembly & Maintenance Manual

Page: 69 / 69

Page 69 of 69
AFTER FLIGHT CHECKS
After each flight, the helicopter should be thoroughly inspected:
(a) Unplug the batteries.
(b) Check every bolt, nut, and screw to make sure none has loosened due to vibration.
(c) Check every rotating and movable part like head rotor, swashplate, tail rotor…to
ensure they still move smoothly and properly.
(d) Check all movable parts, such as gears, ball links, belt, etc. for unusual wear.
(e) Clean up the helicopter then lubricate every moving part with oil to ensure a smooth
operation in the future.
(f) Keep the helicopter in a cool and dry place. Avoid storage under direct sun light or
near heat.
(g) Please replace any damaged parts if they are discovered during maintenance.
WHAT IF THE HELICOPTER CRASHED
Turn off everything and check the helicopter immediately. If any item is damaged,
replace the damaged parts to ensure safe operation. Do not try to glue any broken or
damaged plastic or carbon parts specially broken rotor blades. The followings are parts
that should be inspected right away:
•
Main and tail rotor blades.
•
Flybar, main shaft, head spindle, and tail output shaft.
•
All the gears.
•
Tail boom and supports for cracks.
•
Vertical and horizontal fins.
•
Frames.
•
All pushrods.
•
Servos, motor, and batteries.
SPECIFICATION
Specification Little Sweetie 10 Sweet 16V2
Blades Quick 475-520 mm Quick 550-580 mm
Length 890 mm (35 inch) 1000 mm (39.4 inch)
Height 325.5 mm (13 inch) 355 mm (14 inch)
Weight ~3.8 lbs(1.7 kg) ~4.0 lbs (1.8 kg)
Batteries Li-Po 4S4P Li-Po 4S3P x 2
Motor Aveox 36/30/2 - Axi 4120/14
Frame Thickness 1.6-1.7 mm 2.0-2.6 mm
Spindle 5mm 8mm
Main Shaft 8mm 8mm
Canopy Fiberglass Fiberglass
Flying Aerobatic / 3D Aerobatic / 3D