background image

Introduction

 

viii

 

 

The Quicksilver Division of Brunswick Marine in EMEA (Quicksilver®) provides the following Limited Warranty to the original 
retail owner of its Quicksilver® boat, if purchased from an authorized dealer and operated under normal, subject to remedies, 
exclusions, and limitations set out in this Limited Warranty.

 

 

Europe and Confederation of Independent States

 

WHAT IS COVERED:  Brunswick Marine in EMEA warrants its new products to be free of defects in material and workmanship 
during the period described below.

 

 

DURATION OF COVERAGE:  This Limited Warranty provides coverage for two (2) years from the date the product is first sold 
to  a  recreational  use  retail  purchaser,  or  the  date  on  which  the  product  is  first  put  into  service,  whichever  occurs  first.  
Commercial  users  of  these  products  receive  warranty coverage  of  one (1)  year  from the  date  of  first  retail  sale,  or  one  (1) 
year from the date in which the product was first put into service, whichever occurs first.

 

Commercial use is defined as any work or employment related use of the product, or any use of the product which generates 
income, for any part of the warranty period, even if the product is occasionally used for such purposes.

 

The  repair  or  replacement  of  parts,  or  the  performance  of  service  under  this  warranty,  does  not  extend  the  life  of  this 
warranty  beyond  its  original  expiration  date.    Unexpired  warranty  coverage  can  be  transferred  from  one  recreational  use 
customer to a subsequent recreational use customer upon proper registration of the product.  Unexpired warranty coverage 
may  be  terminated  for  use  or  repossessed  product;  or  product  purchased  at  auction,  form  a  salvage  yard,  or  from  an 
insurance company.

 

 

CONDITIONS THAT MUST BE MET IN ORDER TO OBTAIN WARRANTY COVERAGE:  Warranty coverage is available only to retail 
customers that purchase from a Dealer authorized by Brunswick Marine in EMEA to distribute the product in the country in 
which  the  sale  occurred,  and  then  only  after  the  Brunswick  Marine  in  EMEA  specified  predelivery  inspection  process  is 
completed  and  documented.    Warranty  coverage  becomes  available  upon  proper  registration  of  the  product  by  the 
authorized  dealer.   Routine  maintenance  outlined  in  the Operation  and  Maintenance  Manual must  be  timely  performed  in 
order  to  maintain  warranty  coverage.    Brunswick  Marine  in  EMEA  reserves  the  right  to  make  future  warranty  coverage 
contingent on proof of proper maintenance.

 

 

WHAT  BRUNSWICK  MARINE  IN  EMEA  WILL  DO:    Brunswick  Marine  in  EMEA’s  sole  and  exclusive  obligation  under  this 
warranty is limited to, at our option, repairing a defective part, replacing such part or parts with new or Brunswick Marine in 
EMEA certified remanufactured parts, or refunding the purchase price of the Brunswick Marine in EMEA product.  Brunswick 
Marine  in  EMEA  reserves  the  right  to  improve  or  modify  products  from  time  to  time  without  assuming  an  obligation  to 
modify products previously manufactured.  

 

 

HOW  TO  OBTAIN  WARRANTY  COVERAGE:    The  customer  must  provide  Brunswick  Marine  in  EMEA  with  a  reasonable 
opportunity  to  repair,  and  reasonable  access  to  the  product  for  warranty  service.    Warranty  claims  shall  be  made  by 
delivering the product for inspection to a Brunswick Marine in EMEA authorized dealer to service the product.  If purchaser 
cannot deliver the product to such a dealer, written notice must be given to Brunswick Marine in EMEA.  We will then arrange 
for the inspection and any covered repair.  Purchaser in that case shall pay for all related transportation charges and/or travel 
time.  If the service provided is not covered by this warranty, purchaser shall pay for all related labor and material, and any 
other expenses associated with that service.  Purchaser shall not, unless requested by Brunswick Marine in EMEA, ship the 
product or parts of the product directly to Brunswick Marine in EMEA.  Proof of registered ownership must be presented to 
the dealer at the time warranty service is requested in order to obtain coverage.  

 

 

WHAT  IS  NOT  COVERED:    As  expressly  set  out  herein,  all  warranties  provided  by  the  manufacturers  and  distributors  of 
components,  equipment,  and  parts  (“Component  Manufacturer”)  on  the  boat  are  hereby  assigned  to  the  owner,  to  the 
extent permitted by the Component Manufacturer, as the owner’s sole and exclusive remedy with respect to such items.  Any 
assistance  by  Brunswick  Marine  in  EMEA  and/or  its  authorized  dealers  with  regard  to  component  warranties  shall  not 
constitute an adoption of the responsibilities of a component manufacturer with regard to its component warranties.  This 
Limited Warranty does not apply to any Quicksilver® which has been salvaged or declared a total loss or a constructive total 
loss for any reasons not covered in this Limited Warranty.  This Limited Warranty also does not apply to the following items:

 

1.

 

Engines,  drivetrains,  controls,  propellers,  batteries,  other  equipment  or  accessories  that  carry  their  own 
individual warranties, or equipment and accessories which are not installed by Quicksilver®

 

2.

 

Window damage or breakage

 

About Your Limited Warranty

 

Summary of Contents for Activ 755 Sundeck





























































Reviews: