Quicksilver 675SD — General Information
10
112.5
o
Port Navigation
Light (Red), visible 2NM
360
o
All Around Light
(White), visible 2NM
All around light stored in aft seat base
112.5
o
Stbd Navigation
Light (Green), visible 2NM
Anchor/ navigation light
Fresh water (optional)
Forward bilge pump
Aft bilge pump
13.
Navigation Lights
Your boat comes equipped with navigation lighting for use at night or in low visibility conditions. Prior
to running at night, you must install the stern pole light into the socket located on the transom. A
three position switch, located at the helm switch panel, controls the navigation lights. To turn on the
Navigation lights, push the upper part of the switch forward. This illuminates the port (red), starboard
(green) and all around light (white) showing other vessels that you are underway. To turn on the
anchor light, push the lower part of the switch down. This illuminates the all around light (white),
letting other boaters know that you are anchored at a given location.
Dash Switch Panel
Navigation lights “OFF”
Navigation lights “ON”
Anchor light “ON”
Navigation light switch
Summary of Contents for Activ 675 Sundeck
