Quicksilver Activ 555 Owner'S Manual Download | Manualshive

Page: 36 / 47

background image

24

Quicksilver 555OP — System & Component Overview and Operation

Ski pylon

Deck plate

Stern eyes

Ski pole base

Ski Pole

14.

Leaning Post (optional)

The standard configuration for helm seating is two bucket seats, however your boat can also be
equipped with an optional leaning post with storage. The leaning post consists of a leaning post base,
a leaning post lid, cushion, and footrests. Located inside on the port side of the leaning post storage is
a 12v 17L electric cooler. The cooler is protected by a breaker located next to the battery switch panel
in the cockpit.

Leaning post lid

Leaning post base

Footrest

Leaning post cushion

12v electric cooler

Breaker panel

Leaning Post

15.

Ski Pole (optional)

Your boat may come equipped with an optional ski pole for water skiing. To use, remove the ski pole
deck plate, located on centerline in front of the motorwell. The ski pylon slides into the deck plate and
connects to the ski tow base, located in the bilge.

The ski tow deck plate has rubber O

-

ring gaskets to minimize the amount of water that could

potentially enter the bilge. Quicksilver® suggests that prior to installing or removing the ski pylon,
spray water on the ski pole to help slide it through the deck plate.

«
...
34
35
36
37
38
...
»

Summary of Contents for Activ 555
















































Reviews:

No comments

Related manuals for Activ 555

Brand: MACGREGOR Pages: 22

Brand: Intex Pages: 3

Brand: Rage Pages: 14

Brand: Sea Ray Pages: 22

Brand: Regal Pages: 352

46 Side Console

Brand: Yamarin Cross Pages: 44

Brand: Ranger boats Pages: 36

Brand: La Rochelle Pages: 72

1997 Ski Nautique

Brand: CORRECT CRAFT Pages: 92

Brand: CORRECT CRAFT Pages: 248

Brand: Gumotex Pages: 36

Brand: Yamaha Pages: 117

WaveRunner EX 2021

Brand: Yamaha Pages: 110

Brand: Yamaha Pages: 131

Brand: Ocean Kayak Pages: 1

Brand: SeaSport Pages: 9

Brand: MRS Pages: 12

Brand: COBIA Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands