22
Quicksilver 555OP — System & Component Overview and Operation
Center Aft Bench Seat Backrest
Aft bench seat back
Latches
Bow Table
Table base
Table leg
Bow table
11.
Bow Table (optional)
On your boat, a bow table is available for entertaining. This table and table leg are removable and can
be stored in brackets inside the console. To install the table, first remove the plastic cover located in
the table base plate. Next, screw and lock the table leg into the base plate. Finally, screw the table
onto the table leg.
12.
Center Aft Bench Seat Backrest
Located on the aft bench seat, the center backrest can be rotated forward so that the engine can be
raised to “trailer” position. To rotate, simply unlatch the backrest and flip it forward.
Before trimming the engine to trailer mode, make sure that
the back bench backrest is rotated forward. Failure to do so
could cause damage to the engine and bench seat.
Do not operate the boat with the center aft bench seat
backrest rotated forward. Failure to do this could lead to
injury or death from falling overboard.
Summary of Contents for Activ 555
