
Quicksilver 805PH —
Electrical Systems
52
7.
Galvanic Isolator (optional)
The AC system is equipped with a galvanic isolator, which blocks low voltage DC on the shore power
ground wire.
The galvanic isolator prevents dockside voltages from damaging metal parts on the boat that come in
contact with the water. The galvanic isolator will also safely conduct high currents to ground in the
event of a short circuit or power leakage on your boat. Refer to the manufacturer
’
s manual in your
owners manual packet for complete instructions and warranty on the galvanic isolator.
AC System Layout
Shore power inlet
Main battery system
Galvanic isolator
Battery charger
Salon outlet
Bow thruster battery system
Shore power panel
Under normal conditions, the zincs on the boat should last
at least one year, if not more. If abnormal deterioration of
the zincs occur, a problem exists within the system, and
should be corrected immediately.
8.
Battery Charger (optional)
When turned ON, the battery charger automatically increases current output when there is a drop in
battery voltage. All batteries, including the bow thruster battery, are connected to the battery
charger. When the batteries are charged, the unit maintains a small current flow to keep the batteries
fully charged and ready for service without overcharging.
Summary of Contents for 805PH
