Quicksilver 805PH, Owner'S Manual, Page: 48 / 95

36
Quicksilver 805PH — System & Component Overview and Operation
Wear the lanyard at all times when operating the boat. Use
it to stop only in an emergency. DO NOT use it to shut off
the engine during normal operation
Mechanical & DTS Controls
Engine trim
Engine trim (both engines)
“ Throttle Only ” button
Track pad
Single Engine DTS Control
Twin Engine Mechanical Control
Emergency Engine Shutdown Switch
Ignition shutdown safety switch
Switch clip (attached to switch)
Lanyard
Switch clip (attached to operator)
14. Emergency Engine Shutdown Switch
Your boat is equipped with an ignition shutdown safety switch. The switch is located at the helm near
the engine keys. The ignition shutdown switch incorporates a shut
- off switch and a lanyard. Before
operating the boat, one end of the lanyard must be connected to the shut - off switch while the other
end is connected to the operator. If an emergency arises where the engine must be shut down, pull
the lanyard cord to release it from the shut
- off switch, which in turn shuts down the engine(s). This
switch is designed to shut the engine(s) off when the operator of the boat leaves the control station,
either accidently by falling into the boat, or by being ejected overboard.
The lanyard should be long enough to prevent inadvertent activation. Do not let the lanyard become
entangled.
15. SmartCraft
TM
System Gauges
The instrument package on your boat includes a SmartCraft
TM
tachometer and speedometer multi -
gauge system. By pressing the “ mode ” button on the gauge, specific information vital to the safe
operation of the vessel can be displayed. Refer to your SmartCraft
TM
gauge owner ’ s manual for
specific information on how to get the most out of the multi - gauge display.
In addition, Quicksilver® offers an optional factory installed GPS along with Mercury ’ s Vessel Link
system. If installed, the same engine data that you see on your SmartCraft
TM
gauges can be displayed