Quicksilver 805PH, Owner'S Manual, Page: 63 / 95

Quicksilver 805PH — Electrical Systems
51
Turning Off and Disconnecting Shore Power
To disconnect shore power:
On the Boat
1. Make sure that the all of the breakers on the AC Distribution Panel are OFF
On the Dock
1. Turn OFF the dock breaker.
2. Disconnect the dockside end of the power cord.
On the Boat
1. Disconnect the power cord from the shore power receptacle.
2. Clean the power cord, spray the plugs with a moisture repellent and store the cord in a dry
location on the boat.
You must keep the shore power cord and plug ends clean and dry. This is especially necessary if your
boat is used in salt water. Always clean and spray your cord ends with moisture repellent before using
and before storing the cord.
Do not allow shore power cable end to hang in water. An
electrical field can result which can cause injury or death to
nearby swimmers.
To minimize shock and fire hazards turn off craft ’ s shore
power connection switch before connecting or
disconnecting shore power cable, connect shore power
cable to craft ’ s inlet before connecting to shore power
source, disconnect shore power cable at shore power first,
and close shore power inlet cover tightly.
AC Panel
Reverse polarity indicator
Main breaker switch — 16 Amp
Main test button
Battery charger breaker switch — 10 Amp
Outlet breaker switch — 7 Amp