Quicksilver 755PH — System & Component Overview and Operation
46
NEVER TRAILER THE CANVAS BIMINI, BIMINI WITH
ENCLOSURE, OR SUN AWNING IN THE UPRIGHT POSITION.
The bimini canvas must be secured in the canvas boot with
the rails in the stored position before trailering.
Canvas
hardtop.
Bimini with Enclosure
In addition to the bimini, clear vinyl panels can be installed to enclose the cockpit. Each panel attaches
to the bimini with a zipper and snaps or studs are used to attach to the deck.
Bimini Deployed
Full Enclosure
NEVER OPERATE THE VESSEL WITH THE CANVAS
ENCLOSURE UNLESS THERE IS VENTILATION THROUGHOUT
THE BOAT. The forward and aft canvas panels must be
removed to allow air flow through the boat so Carbon
Monoxide cannot accumulate.
Bimini
Starboard enclosure panel
Port enclosure panel
Aft enclosure panel
Summary of Contents for 755PH
