Quicksilver 755PH, Owner'S Manual

Page: 37 / 71

25
Quicksilver 755PH — System & Component Overview and Operation
water through the pump. To clean the pump strainer, depress the lock tabs on both sides of the pump
and lift the pump motor.
If water does not come out of the discharge hose:
1. Remove the motor module to see if the impeller rotates with the power on.
2. Remove any debris that may have accumulated in the nozzle section or strainer base.
3. Check hose and connection on hull side for debris and proper connections.
Check the function of all bilge pumps at regular intervals.
Clear pump inlet from debris.
The bilge pumping system is not designed for damage
control.
Typical Bilge Pump System
Bilge pump
Bilge pump hose
Thru hull
5.
Livewell System
Your boat is equipped with a 63 liter livewell which is located on the aft port side of the boat. The
livewell is used to keep baitfish alive by circulating seawater through the tank.
Livewell Operation
Before operating the system, make sure that the livewell / raw water pickup valve and the flow
control valve are in the open position. The livewell / raw water pickup valve can be accessed through
the motorwell access plate, while the flow control valve is located on the port aft access tub.
The flow of water into the livewell can be controlled at two different points. First, the flow control
valve, allows you to control the flow of water into the livewell. If you turn the handle clockwise 90
degrees, the flow of water into the livewell will stop. Next, you can adjust the flow at the aerator
spray head. To increase the flow of water, turn the spray head counterclockwise. To decrease the
flow, turn the spray head clockwise.
To fill the livewell, press the switch marked “LIVEWELL” on the battery switch panel located on the
port aft access tub. The livewell overflow drain, located on the forward wall of the livewell, allows
excess water to flow overboard. You can regulate the amount of water in the livewell by inserting a
drain plug, thus raising the level of water to the overflow drain.
Maintenance
Maintenance of the livewell system will require you to check the fittings and hoses to make sure that