Quicksilver 755CR, Owner'S Manual

Page: 32 / 61

Quicksilver 755CR — System & Component Overview and Operation
20
Macerator Switch Location
Macerator switch
Refer to the toilet owner's manual in regards to specific operation of the toilet. When flushing the
toilet, it will take approximately 20 complete up/down strokes to reach the holding tank.
Macerator
The macerator gives the boat operator the means of discharging the holding tank directly
overboard through a seacock in the bottom of the hull. The macerator control is located next to the
main battery panel in the starboard battery panel tub. Since direct overboard discharge is prohibited
in many areas, the macerator seacock is normally closed.
To Operate the Macerator:
1. Make sure the macerator seacock is in the open position.
2. Press and hold the macerator switch located on the main battery panel. The macerator switch
is a momentary switch, which means that it needs to be pressed during operation.
3. When the tank is empty, stop pressing the macerator switch.
4. Return the macerator seacock to the closed position.
Enclosed Toilet
Avoid inadvertent discharge of the black water system.
Always keep the macerator seacock closed when not in use.