Quicksilver 755CR, Owner'S Manual

Page: 48 / 61

Quicksilver 755CR — System & Component Overview and Operation
36
Cockpit Table
Table
Table leg
Table base
21. Sun Lounge (optional)
The cockpit of the 755CR can be transformed into a sun lounge. To install, place the filler board into
the designed position. The filler board edges will sit in the edge of the L
- lounge. Make sure that you
fold down the support leg on the filler board. Next, place the sun lounge cushion on the filler board.
When not in use, the filler board can be stored on the head bulkhead.
Cockpit Sun Lounge
Sun lounge cushion
Filler board
Support leg
By lifting the lever again and moving the aft cockpit seat forward, you can rotate the backrest an
additional 60 degrees so that it lays flat. With the provided sun lounge conversion filler and cushion,
the seat becomes a large area for sunbathing.
To return the backrest to it’s most up - right position, simply lift the lever again and rotate the seat back
up.
20. Cockpit Table
Your boat is equipped with a plastic or an upgraded teak table. To install the table, first remove the
plastic cover located in the table base plate. Next, push and lock the table leg into the base plate.
Finally, place the table onto the table leg. When not in use, either table can be stored on the head
bulkhead, while the table leg is stored in the L lounge seat base.
Do NOT run the boat while the aft cockpit seat is laying flat.
Quicksilver® recommends that when the engine is running,
the seat back is in it’s most up - right position.