Quicksilver 675CR, Owner'S Manual

Page: 42 / 55

30
Quicksilver 675CR— System & Component Overview and Operation
Cockpit Table
Table base
Table leg
17. Cockpit Table
Your boat is equipped with a cockpit table. You will either have a standard plastic table or an optional
teak table. To install the table, first remove the plastic cover located in the table base plate. Next,
push and lock the table leg into the base plate. Finally, place the table onto the table leg. When not in
use, the table can be placed in a canvas bag and both the table and table leg are stored in the port
side of the cabin.
Cockpit Sun Lounge
Table base
Short table leg
Table
Forward filler board
Sun lounge cushion
Support leg
Tab
Receiver
18. Sun Lounge (optional)
The cockpit of the 675CR can be transformed into a sun lounge using the teak table as the filler board.
First remove the plastic cover located in the table base plate, and install the short table leg into the
base plate. Next, install the table onto the table leg, and then place the forward sun lounge filler into
place. Make sure that you insert the two tabs (located on the bottom side of the forward sun lounge
Plastic table
Teak table