background image

12  

Quickie Rumba

Ref: P19093

Position of the Rear tie down restraint on original Rumba, 

(Fig.4.15). 

Position  of  the  Rear  tie  down  label  &  Bracket  on  latest 

Rumba and Rumba Modular, (Fig.4.16).

 

Position  of  the  Rear  tie  down  restraint  on  latest  Rumba 

and Rumba Modular, (Fig.4.17).

WARNING!

4.11 EMC - Radio transmitting devices:

When  operating  two-way  radio,  walkie-talkies,  C.B., 

amateur  radio,  public  mobile  radio  and  other  powerful 

transmitting devices the wheelchair should be brought to 

a halt and turned off. The operation of cordless, mobile 

telephones and cell phones including hands-free devices 

is permitted but if abnormal operation of the wheelchair is 

encountered then the chair must be brought immediately 

to a halt and turned off.

Note:

 the electrical systems of the wheelchair may disturb 

the performance of alarm systems in retail shops.

Position  of  the  Front  tie  down  restraint  on  the  Rumba, 

(Fig.4.11).

Position  of  the  Front  tie  down  label  &  bracket  on  the 

Rumba Modular, (Fig.4.12).

Position  of  the  Front  tie  down  restraint  on  the  Rumba 

Modular, (Fig.4.13). 

Position of the Rear tie down label & bracket on original 

Rumba (Fig.4.14).

 

Fig.4.11

Fig.4.12

Fig.4.15

Fig.4.13

Fig.4.14

Fig.4.16

Fig.4.17

Summary of Contents for Rumba













































Reviews: