background image

930491 Rev. C

7

A L L C O U R T

VI. WARNINGS: FALLS & TIP-OVERS

VI. WARNINGS: FALLS & TIP-OVERS

A. CENTER OF BALANCE

WARNING

The point where this chair will tip forward, back, or to
the side depends on its center of balance and stability.
How your chair is set up, the options you select and the
changes you make may affect the risk of a fall or tip-over.

1. The most important adjustment is the position of the rear

wheels.
a. The more you move your seat back, the more likely your

chair will tip over backward.

2. The Center Of Balance Is Also Affected By:

a. A change in the set-up of your chair, including:

• The distance between the rear wheels.
• The amount of rear wheel camber.
• The seat height and seat angle.
• Backrest angle.

b. A change in your body position, posture or weight distri-

bution.

c. Riding your chair on a ramp or slope.
d. The use of a back pack or other options and the amount

of added weight.

3. To Reduce The Risk Of An Accident:

a.

Consult your doctor, nurse or therapist to find out what
axle and caster position is best for you.

b.

Consult your authorized Quickie supplier BEFORE you
modify or adjust this chair. Be aware that you may need
to make other changes to correct the center of balance.

c.

Have someone help you until you know the balance
points of your chair and how to avoid a tip-over.

d.

Use anti-tip tubes.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of
control may occur and cause severe injury to the rider or others.

B. DRESSING OR CHANGING CLOTHES

WARNING

Your weight may shift if you dress or change clothes while seated in
this chair.

To reduce the risk of a fall or tip-over:

1. Rotate the front casters until they are as far forward as possi-

ble. This makes the chair more stable.

2. Lock anti-tip tubes in place. (If your chair does not have anti-

tip tubes, back it up against a wall and lock both rear
wheels).

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of
control may occur and cause severe injury to the rider or others.

C. WHEELIES

WARNING

Doing a “wheelie” means: balancing on the rear wheels
of your chair, while the front casters are in the air. It is
dangerous to do a “wheelie” as a fall or tip-over may
occur. However, if you do it safely, a “wheelie” can help
you overcome curbs and obstacles.

1. Consult your doctor, nurse or therapist to find out if you are

a good candidate to learn to do a “wheelie.”

2. Do not attempt a “wheelie” UNLESS you are a skilled rider

of this chair or you have help.

NOTE–

See Section VII-A for steps to learn to do a “wheelie.”

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of
control may occur and cause severe injury to the rider or others.

D.OBSTACLES

WARNING

Obstacles and road hazards (such as potholes and bro-
ken pavement) can damage your chair and may cause a
fall, tip-over or loss of control.

To avoid these risks:

1. Keep a lookout for danger – scan the area well ahead of your

chair as you ride.

2. Make sure the floor areas where you live and work are level

and free of obstacles.

3. Remove or cover threshold strips between rooms.
4. Install a ramp at entry or exit doors. Make sure there is not a

drop off at the bottom of the ramp.

5. To Help Correct Your Center Of Balance:

a. Lean your upper body FORWARD slightly as you go UP

over an obstacle.

b. Press your upper body BACKWARD as you go DOWN

from a higher to a lower level.

6. If your chair has anti-tip tubes, lock them in place before you

go UP over an obstacle.

7. Keep both of your hands on the handrims as you go over an

obstacle.

8. Never push or pull on an object (such as furniture or a door-

jamb) to propel your chair.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of
control may occur and cause severe injury to the rider or others.

E. REACHING OR LEANING

WARNING

If you reach or lean it will affect the center of balance of
your chair. This may cause you to fall or tip over. When in
doubt, ask for help or use a device to extend your reach.

1. NEVER reach or lean if you must shift your weight sideways or

rise up off the seat.

2. NEVER reach or lean if you must move forward in your seat

to do so. Always keep your buttocks in contact with the
backrest.

3. NEVER reach with both hands (you may not be able to catch

yourself to prevent a fall if the chair tips).

4. NEVER reach or lean to the rear unless your chair has anti-tip

tubes locked in place.

5. DO NOT reach or lean over the top of the seat back. This

may damage one or both backrest tubes and cause you to fall.

6. If You Must Reach Or Lean:

a. Do not lock the rear wheels. This creates a tip point and

makes a fall or tip-over more likely.

b. Do not put pressure on the footrests.

NOTE–

Leaning forward puts pressure on the footrests and may
cause the chair to tip if you lean too far.

c. Move your chair as close as you can to the object you

wish to reach.

d. Do not try to pick up an object from the floor by reach-

ing down between your knees. You are less likely to tip if
you reach to the side of your chair.

Summary of Contents for Quickie All Court
























Reviews: