50
Quickie Jive
14.3 removing the rwd/fwd castor wheel.
Note the position of the castor & which hole is used to
mount it. Ensure that both castors use the same mount
position.
Use a 5.0mm hex key remove the 2 axle studs,
•
(Fig.14.13).
Remove the centre spacers and spindle, (Fig.14.14).
•
for pneumatic tyres
,
let the air out of the tyre.
•
Undo the 3 hub studs, (Fig.14.15).
•
Lift the hubs out, (Fig.14.16).
•
Gently feed the tube out of the tyre, (Fig.14.17)
•
When refitting the hub studs, tighten to a torque of
•
15-20Nm.
Fig. 14.13
Fig. 14.14
Fig. 14.16
Fig. 14.17
Fig. 14.15