Quickie Jive
33
10.0 controller mounts
10.1 general warnings
warnIng!
Do not replace the joystick knob with any
•
unauthorised item. It may cause hazardous operation
and loss of control of the chair.
It is important that the joystick boot is replaced if it is
•
torn or brittle; failure to do so could cause substance
damage to the controller and unexpected movement
of the chair.
Ensure that you always have comfortable access to
•
the controls whilst the chair is moving and make sure
that the controller is fixed securely to the chair.
warnIng!
To avoid unexpected or unintentional movement of
•
the wheelchair and to conserve battery power, it is
recommended that the control system is switched
Off when drive or seating adjustments are not being
used.
10.2 parallel swing-away general warnings, (fig.10.1)
warnIng!
Before adjusting the swing-away arm, switch off the
•
controller to avoid accidental displacement of the
joystick which would cause unwanted movement of
your wheelchair.
Be aware that the width of your chair has increased
•
if the swing-away arm is out and you may not get
between certain obstacles.
Do not hang any items on or over the parallel swing-
•
away remote assembly as this could damage the
swing-away mechanism.
When transferring to and from the wheelchair do not
•
use the remote as a means of support.
Ensure the power is switched off while adjusting the
•
parallel swing-away arm.
Only operate the wheelchair at low manoeuvring
•
speed when the parallel swing-away is in use. (See
“parallel swing-away” picture on the right).
10.3 attendant control, (fig.10.2)
warnIng!
Ensure that you set the speed of the attendant
•
control to a speed that you can comfortably follow.
Always turn off the power to the controller when
•
leaving the user in the chair.
fig. 10.1
fig. 10.2
