24
HULA
Rev.1.0
5.8 Leg Rests
WARNING!
Be aware of your environment to make sure you do
•
not injure your legs when Leg Rests are extended.
Always ensure that the Leg Rests or foot plates do
•
not come into contact with the castors before driving
the wheelchair.
Leg Rests are not to be used for lifting or carrying the
•
wheelchair under any circumstances.
As with all moving parts be careful not to trap your
•
fingers.
5.8.1 Leg rest removal
To swing away / remove the leg rest:
Push the retaining catch and swing the leg rest out,
•
(Fig.5.33-5.34).
Lift the leg rest up and off if removal is required,
•
(Fig.5.35).
To refit:
Reverse the above process.
5.8.1 Seat Hanger depth adjustment
Remove both sets of Front Crash Test tie down
•
brackets using a 5.0mm Alan Key, (Fig.5.36).
Remove the forward nut and bolt on the side guards,
•
(the one closest to the front of the wheelchair). Use a
10.0mm spanner and 5.0mm Alan Key. (Fig.5.37).
Slide the footrest hanger frame to the desired
•
position, or remove it if required, (Fig.5.38).
Replace the studs and bolts and tighten them.
•
The hanger is now in the new position.
•
Fig. 5.33
Fig. 5.34
Fig. 5.35
Fig. 5.36
Fig. 5.37
Fig. 5.38
