Setup
12
2.2. Implement configuration
Some configurations are specific to the active implement.Each implement needs to be calibrated, because the weight, geometry
and level position of implements vary. Also the weight lifted with different implements can vary. By having you calibrate each
implement separately, the accuracy of results produced by Q-companion is improved.
Configuration of implements is done in the
Implements view.
From that menu you can:
-
Add an implement
-
Select an implement
-
Configure an implements level position
-
Calibrate implement for load weighing
-
Rename implement
-
Delete an implement
bucket
Weighing calibrations
Calibrate level position
Select
Edit name
Delete
Implements
bucket / gravel
balegrip / cal.b
fork / cal.a
New implement
Fig.8 Implement configuration
2.2.1. Add implement
To add a new implement, go to
Implement view,
select
New implement
and press confirm. The new implement will be added to
the list.
Implements
bucket / gravel
balegrip / cal.b
fork / cal.a
New implement
Implements
bucket / gravel
balegrip / cal.b
fork / cal.a
implement1
New implement
Fig.9 Add implement
Summary of Contents for Q-Companion BT
Page 2: ...x ...
Page 204: ...Vikakoodi 202 Elektroninen ohjausyksikkö kiinnitetty kuormaimen etuosaan ...
Page 207: ...x ...
