Driving instructions
13
4.2. Before operating the implement
Check with caution that:
1. The hose connected to the cylinder's (+) side has red
marking, and the implement moves in accordance with
the open/close description.
2. There is no leakage of hydraulic oil.
3. The implement is correctly fitted and that the pins are
in the locked position. Press the tip of the implement
against the ground (1) to check that the implement is
firmly fixed (2).
4. There is no risk of collision between loader and
attachment (see illustration).
4. There is no risk of collision between loader and
attachment.
5. Lubricate the implement sufficiently
5. Lubrication and
maintenance
.
See also the chapter "Connection and disconnection of the
implement" in the loader operating manual.
Fig.17 Check that the implement is secured by pressing its front
end against the ground.
Warning!
Do NOT stand, walk or work under or beside a
raised loader. Make sure you keep everybody,
especially children and animals, away from the
work area.
Fig.18 Do NOT stand, walk or work under a lifted loader.
4.2.1. Dump/Roll back the implement
Right-hand fitting: Move the lever to the left (4) to roll back
the implement.
Move the lever to the right (5) to dump the implement.
Note.
With left-hand mounting, the movements will be
reversed. (This does not apply to EasyDrive LCS and
ElectroDrive LCS which only have right-hand mounting.)
5
5
4
4
0306
Fig.19 Dump/Roll back the implement
