X.Tip
1.
5
2
2
R0
.2
1.
5
1.
5
20
0-
4.2D
20
0-
3.2D
20
0-
2.4D
20
0-
1.6D
20
0-
1.2D
20
0-
B
R
1
R
0.
2
R
0.
2
200-
2B
200-
I
200-
LI
200-
0.8
C
200-
1C
200-
2C
200-3C
200-4C
200-SK
200-
J
200-K
2
00
-H
12
4
5°
1.2
3.
5
12
3.
5
30
°
4
5°
12
0.
5
0.
5
0.
8
0.
8
1
R0
.5
3.
7
4
3.
5
2
12
2
3
2
2
17
3
2
7.
5
15
25
°
12
4
5°
3
3
4
5°
12
12
12
2
12
4
5°
12
4
5°
12
4
5°
2
12
2.
5
12
10
10
12
Ⅰ
. Safety Instruction
CAUTION
When the power is on, the tip’s temperature is very high. The mishandling
may lead to burns or fire, be sure to comply with the following precautions:
Please avoid an abuse of the unit and use the appliance only as the described
manner.
Do not touch the metallic parts near the tip.
Do not use the product near flammable items.
Advise other people in the work area that the unit can reach a very high
temperature and should be considered potentially dangerous.
While replace parts or install tips, turn the power off and allow the unit to cool
to room temperature.
To prevent damage to the unit and ensure a safe working environment, be
sure to comply with the following precautions:
Appliance shall only be used with rated voltage and frequency. (Refer to the
trademark back of equipment.)
Don’t use the appliance if it is damaged, especially the supply cord.
This machine is equipped with a 3-wires grounding plug and must be plugged
into a 3-terminal grounded socket. Do not modify plug or use an ungrounded
power socket. If an extension cord is necessary, use only a 3-wire extension
cord that provides grounding.
Do not use the unit for other applications except soldering.
Only use genuine replacement parts.
Do not wet the unit. When your hands are wet, don’t use and disconnect the
unit, or to pull the supply cord.
The soldering process will produce smoke, so make sure the area is well
ventilated.
While using the unit, don’t do anything which may cause bodily harm or
physical damage.
Page1
Page20
