Quick RDS 1562, Manual For Use And Installation

Page: 18 / 36

18
CHARACTERISTICS AND INSTALLATION
EN
RDS 1562 - IT EN - REV001A
RDS 1562
The RDS 1562 remote display enables you to monitor the status and set the parameters of your SBC NRG+ Medium and
High series, Quick
®
battery chargers. The RDS 1562 utilized a CAN bus communication interface.
The RDS 1562 features:
• Alphanumeric LCD display.
• Multi-language user interface.
• Display three battery charger output voltages.
• Display the total current supplied by the battery charger.
• Backlit display with 6 intensity levels.
• Adjustable display contrast to 5 intensity levels.
• Audible alarm.
• User settable parameters.
• Display powered via CAN Bus cable.
• CAN bus interface for data transfer.
• Easy installation.
• Can work in a wide range of ambient temperatures.
• Reverse polarity protection.
INSTALLATION
The installation of the instrument must be carried out by qualified personnel.
BEFORE USING THE RDS 1562 DISPLAY, CAREFULLY READ THIS USER’S MANUAL. CONTACT YOUR
QUICK
®
SUPPLIER OR AFTER SALES SERVICE DEPARTMENT, FOR SUPPORT.
In case of discordance or errors in translation between the translated version and the original text in the Italian lan-
guage, reference will be made to the Italian or English text.
This device was designed and constructed for use on recreational crafts.
Other forms of use are not permitted without written authorization from the company Quick ® .
The Quick
®
RDS 1562 remote display has been designed for the purposes and tasks outlined in this User's Manual. Quick
®
shall not be held responsible for any direct or indirect property damage or personal injury caused by inappropriate or
unintended use of the equipment, erroneous installation or any errors that may be present in this manual.
THE WARRANTY SHALL BE VOID IF THE INSTRUMENT IS TAMPERED WITH OR ALTERED BY NON
AUTHORISED PERSONNEL.
THE PACKAGE CONTAINS:
RDS 1562 - drilling template - connecting cable - 2 termination connectors - conditions of
warranty - the present manual of installation and use.
INSTALLING THE INSTRUMENT
This manual describes the typical installation procedure. Installation procedures may vary.
Adapt this procedure to satisfy your own personal requirements.
The following recommendations should be considered when determining the location of the display:
• The instrument should be installed in a place where it can be easily read by the operator.
• Select a clean, smooth and flat area.
• Access from the rear must be available for installation and maintenance purposes.
• Leave enough space behind the display to install and access the cable connectors..
• The back of the instrument must be protected against contact with water and moisture.
• Pay attention when drilling the panel or parts of the boat. This hole should not weaken or break/crack the boat's struc-
ture.
F
F