26
EN
HR5 1700/2300/3500W 3000AC HYDRO IT EN - REV001A
FITTING PROCEDURE
When the ideal position has been established, drill four holes us-
ing the drilling template provided. Remove excess material from
the chain passage, refine and flatten with a specialized product
(marine paint, gel coat or two pack epoxy) to assure free pas-
sage for both chain.
Place the upper section of the windlass.
Fix the windlass with M12 stainless steel bolts and screws of
the suitable length.
For an improved watertight seal it is advisable to apply silicone
around the entire outside edge of the base.
Connect the hoses deriving from the selector valve to the flan-
ges of the hydraulic motor (see connection diagram on page 27).
HYDRAULIC WINDLASS
Quick
®
reserves the right to introduce changes to the equipment and the contents of this manual without prior notice.
In case of discordance or errors in translation between the translated version and the original text in the Italian language, reference will be made to the Italian or English text.
F
THE PACKAGE CONTAINS:
hydraulic windlass - handle - drill template - user’s manual - conditions of warranty.
TOOLS REQUIRED FOR INSTALLATION:
drill and drill bits Ø 13 mm (33/64”); hollow mill Ø 43 mm (1”11/16) e Ø 76 mm (2”);
hexagonal wrench: 8 mm.
QUICK
®
”ACCESSORIES RECOMMENDED:
windlass control board (mod. 800) - Watertight hand helds R/C (mod. HRC1002) -
Foot switch (mod. 900) - Anchor chain counter (mod. CHC 1102M e CHC 1202M) - RRC remote radio control (mod. R02, P02, H02).
(1) Measurements taken with a gypsy for a 12 mm chain.
HYDRAULIC MODEL
HR5 HYDRO
Motor type
Reversible gear-type
Motor power
9,6 cc
0,59 in
3
Lifting capacity
• 100 bar = 600 kg • 200 bar = 1700 kg
• 1450.4 psi = 1433 lb • 2900 psi = 3748 lb
Max. chain speed @ working load (1)
40 lt /min = 23 mt/min
9,1 USG/min = 76 ft/min
Weight - model HR5 XDBX / XBDX
55,5 kg
122.3 lb
Weight - model HR5 XDBD / DBDX
60,5 kg
133.4 lb
Weight - model HR5 XXBX / XBXX
52,5 kg
115.7 lb
Weight - model HR5 XBBX
62,5 kg
137.8 lb
SETTING VALUES (suggested by Quick)
Flow rate
40 lt/min
9,1 USG/min
Maximum pression
200 bar
2900 psi
