USER MANUAL
2
Wear protective clothing (protective gloves, safety goggles, etc.) and
avoid contact of the soldering iron with skin and hair or other
flammable materials.
Food is prohibited in this work environment.
The use for the operation may only take place in a dry indoor area,
protect the device from liquids and moisture, also by possibly damp
hands. Otherwise, short circuits and electrical shocks could be
triggered.
Inform others in the work area that the temperature may be very high
during operation. Switch off the device as soon as the work is finished
to avoid danger.
Do not leave the device unattended while it is in operation.
After switching off, wait until the heated parts have reached room
temperature when you touch parts or want to change parts.
CAUTION
Measures for a safe working environment:
Make sure that the device and the shelf are secure. Place the tool on
the shelf when not in use.
The use of the device by children from 8 years and persons with
disabilities is possible if they are supervised and instructed for safe use.
Power supply cables must not come into contact with sharp edges, heat
or oils. Damaged connection cables must be replaced by customer
service to prevent potential hazards such as electric shock, short
circuits or fire.
The device must only be operated at the rated voltage and frequency
specified on the device. Use only supplied earthing contact connecting
cables.
Before use, check the device for damage and the correct fit of the
soldering tip. If damage is detected, it must be switched off. Then
please contact the customer service.
Use only Quick Original replacement parts.
When not in use, keep the device away from dust and moisture.
Pay attention to the respective safety, health and safety regulations.
