MANUAL DE USUARIO
8
2. Installation
Open the box carefully so as not to damage any parts, and make sure the contents are as follows:
Installation
Template
Temperature Kit
(sold separately)
Pass-through kit
(sold separately)
QUICKSALT
control unit
Housing and
Electrolytic cell
Water flow sensor
(flow switch)
Racord and
mounting clamps
Unless you are sure that the PVC pipes do not contain water when you cut and/
or drill them. Use a battery-powered drill and not one that requires connection
to the mains.
2.1. Tools
Below you will find the necessary tools for the electrical and hydraulic installation of your
QUICKSALT
equipment:
- Cleaner and glue for PVC pipes
- Cutting saw suitable for PVC
- Allen key set.
- Set of screwdrivers and tools needed for electrical connection to the control and protection
panel of the pump.
