1
Ⅰ
.Safety Instruction
Make sure the operator has read the operation manual and other materials thoroughly, so that all problems can be
solved, thus minimizing damage during operation. To start operation of the robot, turn on the power switch of the
robot controller device. Please read the following conditions for safety during operation.
1.1 Safety symbol
Serious warning
Danger! High voltage! The product poses a risk of electric shock.
Only authorized personnel can change settings.
Push the red emergency switch for power off in an emergency situation.
Forbid working while the power wire was damaged.
If the device remains unused for a long time please pull the power cord out of
power socket.
During maintenance and inspection of the robot, pull out the power plug of the
controller.
Install a Frame Ground to prevent electric shock.
Please use robot within the standard requirements (such as payload, speed,
operational range, user environment) as stated in the specification. Make sure
specifically that the single phase is not over AV230V/15A before turning the
power on.
Please don't reset the device in the 10s after power off or emergency stop.
Keep the unit dry. Don’t use or disconnect the unit with wet hands.
Please keep clean around the device, so that reduce having an accident.
Do not attach or detach the power cord while the power switch of the controller is
turned ON.
When people and the robot are working together simultaneously, check for
manual safety, especially while the power is ON and during the manual operation.
During maintenance and inspection of the robot, must power off. High voltage,
Authorized personnel only.
The product is not explosion proof specification, forbid using in potentially
explosive atmospheres.
Warning
Do not move the movements by hands, avoid damaging the robot.
During processing, don’t touch the movable parts.
Touch the device while the robot is working may hurt the operator or damage the