10
5-pin socket
Pin NO.
Pin’s name
Instruction of pins
Remark
1
24VDC
Power ”
2
0V
Power supply“-”
3
Ein9
X Axis
X Axis home sensor signal
4
Ein10
Y Axis
Y Axis home sensor signal
5
Eout9
Enable
Enable calibration signal
NOTE: * If the customers need special function, the input and output signal can be set again.
3.2.4 Seven-pin Socket Instruction
The following list describes the pins function of the seven-pin socket. It is connected to dispensing controller.
7-pin socket
Pin NO.
Pin’s name
Instruction of pins
Remark
1
2
3
4
5
6
7
1
24VDC
Power ”
2
0V
Power supply“-”
3
Mout1
Main signal output1, the
current is less than 0.5A
It’s used to feeding signal.
4
Mout4
Main signal output4, the
current is less than 0.5A
It’s used to cylinder movement
signal.
5
Ein12
External input 12 signal
It’s used to reset (ORG) signal,
alarm when solder wire is
blocking or lacking etc.
6
Mout2
Main signal output2, the
current is less than 0.5A
It’s used to output working state
signal.
7
Mout5
Main signal output5, the
current is less than 0.5A
It’s only effective as pulse signal
inputted.
NOTE: * If the customers need special function, the input and output signal can be set again.
3.3 Instruction about DB37 socket
NOTE:
DB37 socket is an optional fitting. It must be ordered if you need it to do information input or output.
3.3.1 Pins Instruction of DB37
(socket of DB37)