Rev 1. 1 05/08/19
- 12 -
TELSEC
©
MP2 User Guide
6.1
Input Status
The input status page will show the current value of the universal inputs currently programmed in the
system. The status page groups the inputs based on their definition, into either digital inputs or analog
inputs. The display will show the digital inputs first followed by the analog points. Click on the expand
window icon to display the points.
6.1.1
Digital Inputs
Digital inputs will show the input number followed by the defined name of the point and the current
value. The page will show the ACCUMULATED ON which represents the entire time the input has been
active (ON), this timer can be cleared. The INTERVAL ON timer shows how long this input has been
active this time, when the input clears (OFF) this value will be held. When the input re-activates, this
timer will clear to zero and start counting. The INTERVAL OFF timer reacts similarly to the ON timer but
only counts when the input is off or inactive. The EVENT counter counts one for each change in state of
the input, on is one, off is two, next on is three and so on. The EVENT TIMER begins counting from the
time the input is programmed or from the time the input was last cleared.
The system will keep track of the number of alarms that are active for the input and display that as a
hyper link. Clicking on the link will bring up a window with a table of active alarms for the point.
The Clear Timer column will be present if you have program level or above access for your password.
Clicking on the clear button will clear all the timers for that input. Alternatively, you can clear all input
timers under Settings/Advanced/Clear Input Timers.
Figure 12 - Digital Input Status