Unpacking
When installing, remove all staple clips and
carefully remove the cardboard packaging.
Fragile parts of the product (upholstery cove-
rings, plastic casings, etc.) may be just below
the packaging. Care must be taken with cutting
instruments.
Once the packaging has been removed, remo-
ve any remaining protective covering.
In the case of packaging on a wooden palette,
remove the packaging as above. Depending
on the model, the product is fi xed either by
screwed fl anges, or by nailed wooden stakes.
Use a spanner (for metal fl anges). Use a claw
hammer (for wooden stakes). Lift the article off
the palette, and take away the remaining pro-
tective covering. The product is now ready for
use.
Storage condition
Ambient Temperature Range :
-5 °C to +38 °C (+23 °F to 100 °F)
Relative Humidity
10 % to 90 % (non-condensing)
Atmospheric Pressure
500 hPa to 1060 hPa (0.49 atm to 1.05 atm)
The following conditions must be observed
when storing any material :
– The area must be clean, well ventilated
and be of a normal temperature.
– Store products away from the elements,
and away from direct sunlight.
– The area must not be damp.
– The products must not be subject to
bumps or jolts.
– Do not store in an area where people
are likely to pass.
– Articles must not be stacked on top of
each other.
– Articles must remain in their original
packaging until fi nal delivery.
Note :
Authorized CE representative
Countries in the EEC should direct all questions, incidents, and complaints to
Promotal’s Authorized CE representative listed below :
Promotal
22, Rue De St. Denis
53500 Ernee,
FRANCE
Phone: + 33 243 05 6895
Fax: + 33 243 05 7200
User’s Guide
Summary of Contents for Promotal
Page 25: ...User s Guide 25 Notes...
