11
In addition to weekly testing, the alarm requires periodic
cleaning to remove dust, dirt, and debris.
Clean the alarm at least once a month to remove dust, dirt, or
debris.
Use a vacuum cleaner with the soft brush, vacuum all sides
and covers of smoke alarm device.
This alarm has a low battery monitor which will cause the alarm
to “chirp” approx every 40 seconds and the red LED flash once
at the same time for a minimum of thirty days when the battery
gets low.
If there is a defective battery or other failures, you can refer to
“Trouble shooting” for solution, if there are still failures during
warranty, you can return to your retailer.
WARNING:The battery is sealed in cover and not replaceable.
Please replace another new alarm if the low battery chirp occurs.
IMPORTANT:
Do not attempt to remove the cover to clean inside.
This will affect warranty.
Maintenance
2
The alarm sounds
different from it is used to.
It starts and stops.
1. Clean smoke alarm device. Please
refer to the “maintenance and
cleaning” section.
2. If there are still failures during
warranty, you can return to
your retailer.
3. If the unit is out of warranty，
replace
with
another new alarm.
Summary of Contents for QM10
Page 8: ...7 Installation Figure 3E 2...
