Important Safeguards
1. During the course of transportation and storage, the product should be avoided from incorrect
operations such as heavy pressing, strong vibration, soaking etc, which can cause damage of
product.
2. The product is designed for ceiling or wall installation, so it can not be installed up-side-
down, and it should be handled properly so as not to bring about mechanical problems
affecting the integrative functions of it. The vitreous cover of the dome is complicated optical
component, so do not touch it with bare hand(s). Otherwise, the cover might be scraped, and
image quality affected.
3. Do not put any foreign objects or spill liquids into the unit.
4. Please follow all electrical standards for safety when it is being connected and adopt the
particular power supply which is provided with the unit. The product‟s RS-485 and video
signal adopt TVS-class lightning damage preventing technology, which can effectively
prevent such pulse signal damage caused by lightning under 500W or electric surge. RS-
485 and video signal should keep enough distance with high voltage equipments and
cables when they are in transmission, and necessary steps should be taken to prevent
lightning damage or power surge.
6. Do not let the camera aim at the sun or object with extreme light when it is switched on or off.
Otherwise, the camera‟s CCD might be permanently damaged.
7. There are no user-serviceable parts inside. When mechanical problems arise, do not be in a
haste to do any repairing, please refers to the User‟s Manual. If causes can not be located, please
refer servicing to qualified professionals. All servicing must be done by authorized personnel.
Table of Contents
1. Introduction ------------------------------------------------------------------------------------ 3
2. Technical Data ---------------------------------------------------------------------
-
---------- 3
3. Characteristics ------------------------------------------------------------------------
-
-------- 4
4. Function ---------------------------------------------------------------------------------------- 4
5. Setup Installation and Connection of the System ----------------------------------------- 6
5.1 Setup of Communication Protocol, Baud Rate and Address of High Speed Dome Camera-----
----------------------------------------------------------------------------------------------- 6