Preparation of the Installation
5.2.1 Requirement for the Installation
· To avoid mistakes, installation must be done by qualified personnel conforming to related
regulations.
· Please check whether the attachments are all ready, and whether the installing location and
type of installation are compatible.
The components of the high speed dome camera include bracket, housings, power supply,
decoding panel, dome, temperature controlling devices, etc.
When the dome camera leaves factory, it has undergone installation testing, so the user
only needs to install the bracket, and fix the dome camera on the bracket.
However, before installation, the user should open the vitreous cover and make sure the
screws are tight and cable connectors not loose.
5.2.2 Wall Installation of Dome Camera
Installation of Wall Bracket
Remarks:
The wall of the selected installation location must be firm without peeling. To
avoid quivering images resulting from unstable installation, make sure the place for
installation can sustain five times the total weight of the dome camera, the bracket and
the base.
A Use the bracket as template and draw the positions of the installing holes on the desired
wall locus;
B Use an electric drill to make four holes for M6 screws on the above-drawn positions, and
drive in the special M6 screws;
C Push the power cable, communication cable and video cable through the bracket tube,
leaving long enough cables for connection;
D Fix the bracket firmly on the wall with four M6 screw nuts and washers.
辅助挂钩
Wall Bracket Installation Dimensions
Ancillary pegs
