Assembly and Installation Tips
Unpacking boxes
l
Place part and assembly boxes as close to the installation location as possible.
l
Keep all individual part and assembly fastener hardware together. Do not intermix or use
fastener hardware for other than the intended part installation.
Fastener Tips
l
Keep fastener hardware with the intended part or assembly: Each training app and optional
shipping box contains all the parts and fasteners required to assembly and install that item.
Keep all fasteners shipped with a part together. Do not interchange, mix, or use fasteners from
one part to install a different part. Doing so will make it difficult to complete the build and if a
fastener is missing, make it difficult to know which fastener type is missing and needs replace-
ment.
IMPORTANT
: Do not interchange optional and training app part fasteners. When unpacking
part boxes, keep the fasteners with the part and do not intermix with other parts. This will
make it easy to assemble and identify any missing fasteners.
:
See Also
"Introduction" on page 1
"Assembly and Installation" on page 9
"Floor Anchoring Requirements" on page 28
8
3 Getting Started
Assembly and Installation Tips
