Quectel EM160R-GL, Hardware Design

Page: 50 / 86

LTE-A Module Series
EM160R-GL_Hardware_Design 49 / 73
4.1.2. Rx Sensitivity
The following table shows the Rx sensitivity of the module.
Table 29: Dual-Antenna Conducted RF Receiver Sensitivity (Unit: dBm)
Frequency Rx Sensitivity
7
(Typical) (dBm) 3GPP (dBm) Comment
8
WCDMA B1 -110.5 -106.7
WCDMA B2 -110 -104.7
WCDMA B3 -111 -103.7
WCDMA B4 -110.5 -106.7
WCDMA B5 -112 -104.7
WCDMA B6 -111 -106.7
6
LTE-FDD B29/B32 and LTE-TDD B46 support Rx only and are only for secondary component carrier.
7
Rx Sensitivity values are measured in dual antennas condition (P Diversity). For single primary antenna (without
Diversity), the sensitivity will drop around 3 dBm for each LTE band.
8
The RB configuration follows 3GPP specification.
LTE-FDD B28 703
–748
758
–803
MHz
LTE-FDD B29
6
- 717
–728
MHz
LTE-FDD B30 2305
–
2315 2350
–
2360 MHz
LTE-FDD B32
6
- 1452
–1496
MHz
LTE-TDD B38 2570
–2620
2570
–2620
MHz
LTE-TDD B39 1880
–1920
1880
–1920
MHz
LTE-TDD B40 2300
–2400
2300
–2400
MHz
LTE-TDD B41 2496
–2690
2496
–2690
MHz
LTE-TDD B42 3400
–
3600 3400
–
3600 MHz
LTE-TDD B43 3600
–
3800 3600
–
3800 MHz
LTE-TDD B46
6
- 5150
–
5925 MHz
LTE-TDD B48 3550
–
3700 3550
–
3700 MHz
LTE-FDD B66 1710
–
1780 2110
–
2200 MHz