LTE-A Module Series
EM160R-GL_Hardware_Design 39 / 73
3.8.1. W_DISABLE1#
The module provides a W_DISABLE1# pin to disable or enable airplane mode through hardware
operation. The W_DISABLE1# pin is pulled up by default. Driving it low will set the module to airplane
mode. In airplane mode, the RF function will be disabled.
The RF function can also be enabled or disabled through AT commands.
Table 16: RF Function Status
3.8.2. W_DISABLE2#
*
The module provides a W_DISABLE2# pin used to disable or enable the GNSS function. The
W_DISABLE2# pin is pulled up by default. Driving it low will disable the GNSS function. The combination
of W_DISABLE2# pin and AT commands can control the GNSS function.
Table 17: GNSS Function Status
ANT_CONFIG
68
DI
Antenna configuration
Logic Level
AT Command
RF Function
Operating Mode
High Level
AT+CFUN=1
Enable
Full functionality mode
AT+CFUN=0
Disable
Minimum functionality mode
AT+CFUN=4
Disable
Airplane mode
Low Level
AT+CFUN=0
AT+CFUN=1
AT+CFUN=4
Disable
Airplane mode
W_DISABLE2# Level
AT Command
GNSS Function Status
High Level
AT+QGPS=1
Enable
AT+QGPSEND
Disable
Low Level
AT+QGPS=1
AT+QGPSEND
