Quectel EC200U Series Hardware Design Download

Page: 63 / 100

LTE Standard Module Series

EC200U_Series_Hardware_Design 58 / 94

Antenna Interfaces

EC200U series module provides a main antenna interface, a Wi-Fi Scan/Bluetooth antenna interface and

a GNSS antenna interface. The antenna ports have an impedance of 50

Ω.

4.1. Main Antenna and Wi-Fi Scan/Bluetooth Antenna Interfaces

4.1.1. Pin Definition

The pin definition of main antenna and Wi-Fi Scan/Bluetooth antenna interfaces is shown below.

Table 33: Pin Definition of Antenna Interfaces

Pin Name

Pin No.

I/O

Description

Comment

ANT_MAIN

AIO

Main antenna interface

Ω impedance.

ANT_BT/WIFI

_SCAN

AIO

The shared antenna interface of Wi-Fi

Scan/Bluetooth; Bluetooth and Wi-Fi

Scan cannot be used simultaneously;

Wi-Fi Scan antenna can only receive

but not transmit.

Ω impedance.

If unused, keep it open.

EC200U series supports Bluetooth and Wi-Fi Scan functions. Due to the shared antenna interface, the

two functions cannot be used at the same time; Bluetooth and Wi-Fi Scan functions are optional

(supported or not supported simultaneously), please contact Quectel Technical Supports for details.

NOTE

Summary of Contents for EC200U Series





































































































Search results

Summary of Contents for EC200U Series

Reviews:

Related manuals for EC200U Series

Brands by name

Popular brands

Quectel EC200U Series, Hardware Design

Search results

Summary of Contents for EC200U Series

Reviews:

Related manuals for EC200U Series

Brands by name

Popular brands