LTE Module Series
BG96-NA Hardware Design
BG96-NA_Hardware_Design Confidential / Released 13 / 64
2.2. Key Features
The following table describes the detailed features of BG96-NA module.
Table 2: Key Features of BG96-NA
Features
Details
Power Supply
Supply voltage: 3.3V~4.3V
Typical supply voltage: 3.8V
Transmitting Power
Class 3 (23dBm±2.7dB) for LTE-FDD bands
LTE Features
Support up to LTE Cat M1
Support 1.08MHz RF bandwidth
Support SISO in DL direction
Cat M1: Max. 375kbps (DL)/375kbps (UL)
Internet Protocol
Features*
Support TCP/UDP/PPP protocols
Support PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol) protocols which are usually used for
PPP connections
SMS*
Text and PDU mode
Point to point MO and MT
SMS cell broadcast
SMS storage: ME by default
(U)SIM Interface
Support (U)SIM card: 1.8V, 3.0V
USB Interface
Compliant with USB 2.0 specification (slave only); the data transfer rate
can reach up to 480Mbps
Used for AT command communication, data transmission, GNSS NMEA
output, software debugging and firmware upgrade
SupportUSB drivers forWindows XP, Windows Vista, Windows 7, Windows
8/8.1, Windows 10, Windows CE 5.0/6.0/7.0*,Linux 2.6/3.x/4.1,Android
4.x/5.x/6.0
UART Interface
UART1:
Used for AT command communication and data transmission
Baud rate reach up to 3000000bps; 115200bps by default
Support RTS and CTS hardware flow control
UART2:
Used for module debugging and log output
115200bps baud rate
AT Commands
3GPP TS 27.007 and 3GPP TS 27.005 AT commands, as well as
Quectel enhanced AT commands
Network Indication
OneNETLIGHT pin for network connectivity status indication
