Quectel BC26 Manual Download

Page: 62 / 73

NB-IoT Module Series

BC26 AT Commands Manual

BC26_AT_Commands_Manual 62 / 73

DL-SCH, excluding BCCH. Calculated from the beginning of successfully

established / resumed /re-established RRC connection, or since previous

AT*MENGINFO query with <mode>=1, whichever is later. Available only in

RRC-CONNECTED state. Unit: bytes

<MAC_UL_total_HARQ_TX>

Integer value. Total number of HARQ (re)transmissions for transport

blocks on UL-SCH. Calculated from the beginning of successfully

established / resumed / re-established RRC connection, or since

previous AT*MENGINFO query with <mode>=1, whichever is later.

Available only inRRC-CONNECTED state. Unit: (re)transmissions

<MAC_DL_total_HARQ_TX>

Integer value. Total number of HARQ (re)transmissions for transport

blocks on DL-SCH, excluding BCCH. Calculated from the beginning of

successfully established / resumed / re-established RRC connection, or

since previous AT*MENGINFO query with <mode>=1, whichever is later.

Available only in RRCCONNECTED state. Unit: (re)transmissions

<MAC_UL_HARQ_re_TX>

Integer value. Number of HARQ retransmissions for transport blocks on

UL-SCH. Calculated from the beginning of successfully established

/resumed / re-established RRC connection, or since previous

AT*MENGINFO query with <mode>=1, whichever is later. Available only

in RRC-CONNECTED state. Unit: retransmissions

<MAC_DL_HARQ_re_TX>

Integer value. Number of HARQ retransmissions for transport blocks on

DL-SCH, excluding BCCH. Calculated from the beginning of

successfully established / resumed / re-established RRC connection, or

since previous AT*MENGINFO query with <mode>=1, whichever is later.

Available only in RRCCONNECTED state. Unit: retransmissions.

<RLC_UL_tput>

Integer value. RLC uplink throughput. Calculated over all established RLC AM radio

bearers. Calculated from the beginning of successfully established /

resumed RRC

connection, or since previous AT*MENGINFO query with <mode>=1, whichever is

later. Available only in RRC-CONNECTED state. Unit: kbits / s

<RLC_DL_tput>

Integer value. RLC downlink throughput. Calculated over all established RLC AM

radio bearers Calculated from the beginning of successfully established /resumed

RRC connection, or since previous AT*MENGINFO query with <mode>=1, whichever

is later. Available only in RRC-CONNECTED state. Unit: kbits / s

<MAC_UL_tput>

Integer value. UL throughput in MAC for UL-SCH.

Calculated from the beginning of successfully established / resumed / re-established

RRC connection, or since previous AT*MENGINFO query with <mode>=1, whichever

is later.Available only in RRC-CONNECTED state. Unit: kbits / s

<MAC_DL_tput>

Integer value. DL throughput in MAC for DL-SCH, excluding BCCH. Calculated from

the beginning of successfully established / resumed / re-established RRC connection,

or since previous AT*MENGINFO query with <mode>=1, whichever is later. Available

only in RRC-CONNECTED state. Unit: kbits / s

Summary of Contents for BC26










































































Search results

Summary of Contents for BC26

Reviews:

Related manuals for BC26

Brands by name

Popular brands

Quectel BC26, Manual

Search results

Summary of Contents for BC26

Reviews:

Related manuals for BC26

Brands by name

Popular brands