Quectel BC26 Manual Download

Page: 58 / 73

NB-IoT Module Series

BC26 AT Commands Manual

BC26_AT_Commands_Manual 58 / 73

6.5. AT+QNBIOTRAI NB-IoT Release Assistance Indication

This command is used to set the NB-IoT release assistance indication as follows:

• No information available
• TE will send only 1 UL packet and no DL packet is expected
• TE will send only 1 UL packet and only 1 DL packet is expected

Parameter

6.6. AT+QATWAKEUP Enable Deep Sleep Wakeup Indication

This command is used to enable an unsolicited result code on a channel that indicates when the modem

is fully woken up after a deep sleep.

AT+QNBIOTRAI NB-IoT Release Assistance Indication

Test Command

AT+QNBIOTRAI=?

Response

+QNBIOTRAI: (list of supported <rai>s)

Execution command

AT+QNBIOTRAI=<rai>

Response

Otherwise response:

ERROR

Read Command

AT+QNBIOTRAI?

Response

+QNBIOTRAI

: <rai>

<rai>

Integer type. Specifies release assistance information:

0 No information available (or none of the other options apply) (default)

1 TE will send only 1 UL packet and no DL packets expected

2 TE will send only 1 UL packet and only 1 DL packet expected

AT+QATWAKEUP Enable Deep Sleep Wakeup Indication

Test Command

AT+QATWAKEUP=?

Response

+QATWAKEUP: (list of supported <enable>s)

Summary of Contents for BC26










































































Search results

Summary of Contents for BC26

Reviews:

Related manuals for BC26

Brands by name

Popular brands

Quectel BC26, Manual

Search results

Summary of Contents for BC26

Reviews:

Related manuals for BC26

Brands by name

Popular brands