![background image](http://html1.mh-extra.com/html/queclink/gv65-plus/gv65-plus_user-manual_3668972018.webp)
GV65 Plus User Manual
TRACGV65PUM001
- 17 -
Figure 14.
Typical Connection with LED
Note:
1 - OUT1 will latch the output state during reset.
2- Many modern relays come with a flyback
diode pre-installed internal to the relay itself. If the
relay has this diode, ensure the relay polarity is properly connected. If this diode is not internal, it
should be added externally. A common diode such as a 1N4004 will work in most circumstances.
3.12.
Device Status LED
Queclink
Confidential