EN
.
47
Parameter no. 112
–
Power threshold
–
Delay before power on
External IR relay/ External relay is turned off due to detected overload (as set by parameter
106&107) and remains off for a time, defined in this parameter. After that time, the output
turns on to check, if the overload is still present.
Available configuration parameters (data type is 2 Byte DEC)
•
Default value 0 (disabled)
•
0
–
External IR relay/ External relay will not turn back on
•
30
–
32535 = 30 s
–
32535 s
NOTE: the delay time may be prolonged for more then 10s of the time set by the parameter.
